2000 MAZDA B-Series Cab Plus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 MAZDA B-Series Cab Plus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 93.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2000 B-Series Cab Plus — Year-Specific Fitment Context
The 2000 MAZDA B-Series Cab Plus is in year 4 of 8 using the 6x139.7 pattern (1997–2004). Wheels from any 1997–2004 MAZDA B-Series Cab Plus are cross-compatible with the 2000 model. Across its full production run (1992–2004), the B-Series Cab Plus has also used: 5x114.3.
MAZDA B-Series Cab Plus Bolt Pattern by Year
The table below shows how the B-Series Cab Plus's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 6x139.7 | 93.1 | 25 |
| 1998 | 6x139.7 | 93.1 | 25 |
| 1999 | 6x139.7 | 93.1 | 25 |
| ▸ 2000 | 6x139.7 | 93.1 | 25 |
| 2001 | 6x139.7 | 93.1 | 25 |
| 2002 | 6x139.7 | 93.1 | 25 |
| 2003 | 6x139.7 | 93.1 | 25 |
| 2004 | 6x139.7 | 93.1 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2000 MAZDA B-Series Cab Plus
For your 2000 MAZDA B-Series Cab Plus, the 6x139.7 bolt pattern is shared with 1997–2004 models. The 93.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stock is 25mm; deviations affect scrub radius and clearance. Use only 12x1.50 lug nuts with the correct seat (cone seat for most aftermarket wheels, ball seat for OEM). Improper thread pitch or seat type can cause wheel loss. Always verify lug nut compatibility.
Historical Fitment Data Reference
In our dataset, MAZDA B-Series Cab Plus appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Check wheel clearance with the brake caliper and suspension; aftermarket offsets may require spacers or longer studs.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 MAZDA B-Series Cab Plus — Frequently Asked Questions
What is the bolt pattern for a 2000 MAZDA B-Series Cab Plus?
The 2000 MAZDA B-Series Cab Plus uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 93.1mm and the offset is 25mm.
What other years of MAZDA B-Series Cab Plus have the same bolt pattern as the 2000?
The MAZDA B-Series Cab Plus uses the 6x139.7 pattern from 1997 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2000 MAZDA B-Series Cab Plus?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2000 MAZDA B-Series Cab Plus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 B-Series Cab Plus, the PCD is 6x139.7.
Why is matching the 93.1mm center bore important for the 2000 B-Series Cab Plus?
The 93.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2000 MAZDA B-Series Cab Plus?
The OEM offset for the 2000 B-Series Cab Plus is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset