1994 MAZDA B-Series Cab Plus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 MAZDA B-Series Cab Plus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 B-Series Cab Plus — Year-Specific Fitment Context
The 1994 MAZDA B-Series Cab Plus is in year 3 of 5 using the 5x114.3 pattern (1992–1996). Wheels from any 1992–1996 MAZDA B-Series Cab Plus are cross-compatible with the 1994 model. Across its full production run (1992–2004), the B-Series Cab Plus has also used: 6x139.7.
MAZDA B-Series Cab Plus Bolt Pattern by Year
The table below shows how the B-Series Cab Plus's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| ▸ 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 6x139.7 | 93.1 | 25 |
| 1998 | 6x139.7 | 93.1 | 25 |
| 1999 | 6x139.7 | 93.1 | 25 |
| 2000 | 6x139.7 | 93.1 | 25 |
| 2001 | 6x139.7 | 93.1 | 25 |
| 2002 | 6x139.7 | 93.1 | 25 |
| 2003 | 6x139.7 | 93.1 | 25 |
| 2004 | 6x139.7 | 93.1 | 25 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 MAZDA B-Series Cab Plus
For your 1994 MAZDA B-Series Cab Plus, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset range is 45-50mm; deviating may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—typically conical (60-degree) for aftermarket wheels. Avoid ball-seat lug nuts unless specified. Improper lug nut fitment can lead to wheel detachment. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, MAZDA B-Series Cab Plus appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using wheels with a lower offset; spacers may be needed.
- ✅ Avoid using wheels from 1997-2004 models as they use a 6x139.7 pattern.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 MAZDA B-Series Cab Plus — Frequently Asked Questions
What is the bolt pattern for a 1994 MAZDA B-Series Cab Plus?
The 1994 MAZDA B-Series Cab Plus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA B-Series Cab Plus have the same bolt pattern as the 1994?
The MAZDA B-Series Cab Plus uses the 5x114.3 pattern from 1992 through 1996. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the PCD for a 1994 MAZDA B-Series Cab Plus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 B-Series Cab Plus, the PCD is 5x114.3.
What does 45-50mm offset mean for the 1994 B-Series Cab Plus?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
How do I measure the bolt pattern on my 1994 MAZDA?
The 1994 B-Series Cab Plus uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another MAZDA fit my 1994 B-Series Cab Plus?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset