1996 MAZDA B-Series Cab Plus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 MAZDA B-Series Cab Plus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 B-Series Cab Plus — Year-Specific Fitment Context
The 1996 model year is the final year of the MAZDA B-Series Cab Plus's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1996 MAZDA B-Series Cab Plus are cross-compatible with the 1996 model. Important: starting in 1997, MAZDA switched to 6x139.7 — those wheels will not fit the 1996 model. Across its full production run (1992–2004), the B-Series Cab Plus has also used: 6x139.7.
MAZDA B-Series Cab Plus Bolt Pattern by Year
The table below shows how the B-Series Cab Plus's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| ▸ 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 6x139.7 | 93.1 | 25 |
| 1998 | 6x139.7 | 93.1 | 25 |
| 1999 | 6x139.7 | 93.1 | 25 |
| 2000 | 6x139.7 | 93.1 | 25 |
| 2001 | 6x139.7 | 93.1 | 25 |
| 2002 | 6x139.7 | 93.1 | 25 |
| 2003 | 6x139.7 | 93.1 | 25 |
| 2004 | 6x139.7 | 93.1 | 25 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 MAZDA B-Series Cab Plus
For your 1996 MAZDA B-Series Cab Plus, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibration and stress on lug studs. The offset must stay within 45-50mm to avoid rubbing or clearance issues with suspension and fenders. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) or ball seat, depending on your wheel. Never use acorn or flat-seat lug nuts unless specified. Improper lug nut seating can lead to wheel detachment. Verify that wheels are from 1992-1996 models; 1997+ wheels with 6x139.7 will not fit.
Historical Fitment Data Reference
In our dataset, MAZDA B-Series Cab Plus appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 67.1mm; they will not fit over the hub.
- ✅ Check for clearance with brake calipers and suspension components when using aftermarket wheels with lower offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 MAZDA B-Series Cab Plus — Frequently Asked Questions
What is the bolt pattern for a 1996 MAZDA B-Series Cab Plus?
The 1996 MAZDA B-Series Cab Plus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA B-Series Cab Plus have the same bolt pattern as the 1996?
The MAZDA B-Series Cab Plus uses the 5x114.3 pattern from 1992 through 1996. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Will 1997 MAZDA B-Series Cab Plus wheels fit a 1996 model?
No. The 1997 MAZDA B-Series Cab Plus switched to a 6x139.7 bolt pattern, which is not compatible with the 1996 model's 5x114.3. Using mismatched patterns is unsafe.
How do I measure the bolt pattern on my 1996 MAZDA?
The 1996 B-Series Cab Plus uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another MAZDA fit my 1996 B-Series Cab Plus?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 1996 MAZDA B-Series Cab Plus?
The OEM offset for the 1996 B-Series Cab Plus is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset