1992 MAZDA B-Series Cab Plus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 MAZDA B-Series Cab Plus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 B-Series Cab Plus — Year-Specific Fitment Context
The 1992 model year marks the beginning of the MAZDA B-Series Cab Plus's 5x114.3 bolt pattern era, which continued through 1996 (5 consecutive years). Wheels from any 1992–1996 MAZDA B-Series Cab Plus are cross-compatible with the 1992 model. Across its full production run (1992–2004), the B-Series Cab Plus has also used: 6x139.7.
MAZDA B-Series Cab Plus Bolt Pattern by Year
The table below shows how the B-Series Cab Plus's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 6x139.7 | 93.1 | 25 |
| 1998 | 6x139.7 | 93.1 | 25 |
| 1999 | 6x139.7 | 93.1 | 25 |
| 2000 | 6x139.7 | 93.1 | 25 |
| 2001 | 6x139.7 | 93.1 | 25 |
| 2002 | 6x139.7 | 93.1 | 25 |
| 2003 | 6x139.7 | 93.1 | 25 |
| 2004 | 6x139.7 | 93.1 | 25 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 MAZDA B-Series Cab Plus
For your 1992 MAZDA B-Series Cab Plus, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 45-50mm; deviating can cause rubbing or bearing stress. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or ball seat (OEM Mazda). Mixing seat types leads to loose wheels. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, MAZDA B-Series Cab Plus appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is 67.1mm or use hub-centric rings; avoid lug-centric mounting.
- ✅ Check for caliper clearance with 15-inch wheels; some aftermarket designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 MAZDA B-Series Cab Plus — Frequently Asked Questions
What is the bolt pattern for a 1992 MAZDA B-Series Cab Plus?
The 1992 MAZDA B-Series Cab Plus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA B-Series Cab Plus have the same bolt pattern as the 1992?
The MAZDA B-Series Cab Plus uses the 5x114.3 pattern from 1992 through 1996. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the factory wheel offset for a 1992 MAZDA B-Series Cab Plus?
The OEM offset for the 1992 B-Series Cab Plus is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1992 MAZDA B-Series Cab Plus?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1992 MAZDA B-Series Cab Plus?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 1992 MAZDA?
The 1992 B-Series Cab Plus uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset