1994 MAZDA B-Series Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 MAZDA B-Series Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 B-Series Regular Cab — Year-Specific Fitment Context
The 1994 MAZDA B-Series Regular Cab is in year 3 of 18 using the 5x114.3 pattern (1992–2009). Wheels from any 1992–2009 MAZDA B-Series Regular Cab are cross-compatible with the 1994 model. Across its full production run (1992–2009), the B-Series Regular Cab has also used: 6x139.7.
MAZDA B-Series Regular Cab Bolt Pattern by Year
The table below shows how the B-Series Regular Cab's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| ▸ 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 6x139.7 | 93.1 | 25 |
| 1998 | 6x139.7 | 93.1 | 25 |
| 1999 | 6x139.7 | 93.1 | 25 |
| 2000 | 6x139.7 | 93.1 | 25 |
| 2001 | 6x139.7 | 93.1 | 25 |
| 2002 | 6x139.7 | 93.1 | 25 |
| 2003 | 6x139.7 | 93.1 | 25 |
| 2004 | 6x139.7 | 93.1 | 25 |
| 2005 | 6x139.7 | 93.1 | 25 |
| 2006 | 6x139.7 | 93.1 | 25 |
| 2007 | 6x139.7 | 93.1 | 25 |
| 2008 | 5x114.3 | 67.1 | 45-50 |
| 2009 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 MAZDA B-Series Regular Cab
For your 1994 MAZDA B-Series Regular Cab, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to avoid vibrations. The offset range is tight at 45-50mm; deviating may cause rubbing or clearance issues. Always use lug nuts with 12x1.5 thread pitch and proper seat type (cone or ball) matching the wheel. Improper lug nuts can lead to wheel detachment. Wheels from 1992–2009 B-Series are compatible, but verify offset and bore. Safety first: never compromise on fitment.
Historical Fitment Data Reference
In our dataset, MAZDA B-Series Regular Cab appears from 1992 to 2009 (18 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore; they won't fit without machining.
- ✅ Check for brake caliper clearance when using wheels with offset near 45mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 MAZDA B-Series Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1994 MAZDA B-Series Regular Cab?
The 1994 MAZDA B-Series Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA B-Series Regular Cab have the same bolt pattern as the 1994?
The MAZDA B-Series Regular Cab uses the 5x114.3 pattern from 1992 through 2009. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the PCD for a 1994 MAZDA B-Series Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 B-Series Regular Cab, the PCD is 5x114.3.
What lug nut size does the 1994 MAZDA B-Series Regular Cab use?
The 1994 MAZDA B-Series Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1994 MAZDA B-Series Regular Cab?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Will wheels from another MAZDA fit my 1994 B-Series Regular Cab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset