2006 MAZDA Tribute Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 MAZDA Tribute, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Tribute — Year-Specific Fitment Context
The 2006 MAZDA Tribute is in year 6 of 11 using the 5x114.3 pattern (2001–2011). Wheels from any 2001–2011 MAZDA Tribute are cross-compatible with the 2006 model.
MAZDA Tribute Bolt Pattern by Year
The table below shows how the Tribute's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 MAZDA Tribute has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MAZDA Tribute appears from 2001 to 2011 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2006 MAZDA Tribute — Frequently Asked Questions
What is the bolt pattern for a 2006 MAZDA Tribute?
The 2006 MAZDA Tribute uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of MAZDA Tribute have the same bolt pattern as the 2006?
The MAZDA Tribute uses the 5x114.3 pattern from 2001 through 2011. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What lug nut size does the 2006 MAZDA Tribute use?
The 2006 MAZDA Tribute uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 45mm offset mean for the 2006 Tribute?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Can I put aftermarket wheels on my 2006 MAZDA Tribute?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2006 MAZDA Tribute?
The OEM offset for the 2006 Tribute is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
MAZDA Tribute is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2001-2011 (10 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 MAZDA Tribute, please report it via our About page contact so we can verify and update this record.