2008 MAZDA Tribute Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 MAZDA Tribute, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Tribute — Year-Specific Fitment Context
The 2008 MAZDA Tribute is in year 8 of 11 using the 5x114.3 pattern (2001–2011). Wheels from any 2001–2011 MAZDA Tribute are cross-compatible with the 2008 model.
MAZDA Tribute Bolt Pattern by Year
The table below shows how the Tribute's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 MAZDA Tribute
For your 2008 MAZDA Tribute, the 5x114.3 bolt pattern is shared across 2001–2011 models, ensuring cross-compatibility. The 67.1mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 45mm offset should be maintained within ±5mm to avoid rubbing or clearance issues. Always use the correct lug nuts: 12x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen or damage the wheel. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, MAZDA Tribute appears from 2001 to 2011 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing on struts or fenders.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 67.1mm center bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 MAZDA Tribute — Frequently Asked Questions
What is the bolt pattern for a 2008 MAZDA Tribute?
The 2008 MAZDA Tribute uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of MAZDA Tribute have the same bolt pattern as the 2008?
The MAZDA Tribute uses the 5x114.3 pattern from 2001 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 MAZDA Tribute?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What does 45mm offset mean for the 2008 Tribute?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
What is the center bore of a 2008 MAZDA Tribute?
The factory center bore (hub bore) for the 2008 MAZDA Tribute is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 MAZDA?
The 2008 Tribute uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset