2017 Mercedes-Benz Metris Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Mercedes-Benz Metris Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Metris Cargo — Year-Specific Fitment Context
The 2017 Mercedes-Benz Metris Cargo is in year 2 of 7 using the 5x112 pattern (2016–2022). Wheels from any 2016–2022 Mercedes-Benz Metris Cargo are cross-compatible with the 2017 model.
Mercedes-Benz Metris Cargo Bolt Pattern by Year
The table below shows how the Metris Cargo's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2017 Mercedes-Benz Metris Cargo
For your 2017 Mercedes-Benz Metris Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 66.6mm or 73.1mm); if the bore is larger than 66.6mm, you must use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 30-50mm; staying within this range avoids rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either cone seat (60-degree) or ball seat, matching the wheel's design. Using the wrong seat can cause lug nuts to loosen or fail. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris Cargo appears from 2016 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from non-Metris Mercedes models (e.g., C-Class) as offset and bore may differ.
- ✅ If using aftermarket wheels, confirm the hub bore is at least 66.6mm and use hub-centric rings if larger.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Mercedes-Benz Metris Cargo — Frequently Asked Questions
What is the bolt pattern for a 2017 Mercedes-Benz Metris Cargo?
The 2017 Mercedes-Benz Metris Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris Cargo have the same bolt pattern as the 2017?
The Mercedes-Benz Metris Cargo uses the 5x112 pattern from 2016 through 2022. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the center bore of a 2017 Mercedes-Benz Metris Cargo?
The factory center bore (hub bore) for the 2017 Mercedes-Benz Metris Cargo is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 66.6mm center bore important for the 2017 Metris Cargo?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2017 Mercedes-Benz Metris Cargo?
The OEM offset for the 2017 Metris Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 30-50mm offset mean for the 2017 Metris Cargo?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset