2021 Mercedes-Benz Metris Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Mercedes-Benz Metris Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Metris Cargo — Year-Specific Fitment Context
The 2021 Mercedes-Benz Metris Cargo is in year 6 of 7 using the 5x112 pattern (2016–2022). Wheels from any 2016–2022 Mercedes-Benz Metris Cargo are cross-compatible with the 2021 model.
Mercedes-Benz Metris Cargo Bolt Pattern by Year
The table below shows how the Metris Cargo's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2021 Mercedes-Benz Metris Cargo
For your 2021 Mercedes-Benz Metris Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 30-50mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct 14x1.5 thread pitch and seat type (ball or cone, depending on wheel). Mismatched seats can lead to loose wheels. Re-torque after 50-100 miles. Wheels from 2016-2022 Metris models are direct fit.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris Cargo appears from 2016 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110-130 Nm after 50-100 miles of driving.
- ✅ Aftermarket wheels often require hub-centric rings (66.6mm to wheel bore) to avoid vibrations.
- ✅ Verify offset with a test fit; 30-50mm is safe, but lower offsets may rub suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Mercedes-Benz Metris Cargo — Frequently Asked Questions
What is the bolt pattern for a 2021 Mercedes-Benz Metris Cargo?
The 2021 Mercedes-Benz Metris Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris Cargo have the same bolt pattern as the 2021?
The Mercedes-Benz Metris Cargo uses the 5x112 pattern from 2016 through 2022. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What does 30-50mm offset mean for the 2021 Metris Cargo?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the factory wheel offset for a 2021 Mercedes-Benz Metris Cargo?
The OEM offset for the 2021 Metris Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2021 Mercedes-Benz Metris Cargo?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2021 Mercedes-Benz Metris Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset