2020 Mercedes-Benz Sprinter 4500 Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mercedes-Benz Sprinter 4500 Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 4500 Crew — Year-Specific Fitment Context
The 2020 Mercedes-Benz Sprinter 4500 Crew is in year 2 of 4 using the 5x112 pattern (2019–2022). Wheels from any 2019–2022 Mercedes-Benz Sprinter 4500 Crew are cross-compatible with the 2020 model.
Mercedes-Benz Sprinter 4500 Crew Bolt Pattern by Year
The table below shows how the Sprinter 4500 Crew's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Mercedes-Benz Sprinter 4500 Crew
The 2020 Mercedes-Benz Sprinter 4500 Crew uses a 5x112 bolt pattern with a 66.6mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset range is 30-50mm; staying within this range maintains correct suspension geometry and clearance. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—conical (60-degree) or ball seat—matching the wheel's design. Improper lug nut seating can lead to wheel detachment. Verify that the wheel's load rating meets or exceeds the vehicle's requirements, especially for heavy-duty use.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 4500 Crew appears from 2019 to 2022 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 66.6mm without hub-centric rings; vibrations and stress on studs may occur.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels; the Sprinter's large brakes require sufficient spoke clearance.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mercedes-Benz Sprinter 4500 Crew — Frequently Asked Questions
What is the bolt pattern for a 2020 Mercedes-Benz Sprinter 4500 Crew?
The 2020 Mercedes-Benz Sprinter 4500 Crew uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 4500 Crew have the same bolt pattern as the 2020?
The Mercedes-Benz Sprinter 4500 Crew uses the 5x112 pattern from 2019 through 2022. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the PCD for a 2020 Mercedes-Benz Sprinter 4500 Crew?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Sprinter 4500 Crew, the PCD is 5x112.
What does 30-50mm offset mean for the 2020 Sprinter 4500 Crew?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the center bore of a 2020 Mercedes-Benz Sprinter 4500 Crew?
The factory center bore (hub bore) for the 2020 Mercedes-Benz Sprinter 4500 Crew is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2020 Mercedes-Benz Sprinter 4500 Crew?
The OEM offset for the 2020 Sprinter 4500 Crew is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset