2000 Mercury Mystique Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Mercury Mystique, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x108 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 63.3 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Mystique — Year-Specific Fitment Context
The 2000 model year is the final year of the Mercury Mystique's 4x108 bolt pattern run (since 1995). Wheels from any 1995–2000 Mercury Mystique are cross-compatible with the 2000 model.
Mercury Mystique Bolt Pattern by Year
The table below shows how the Mystique's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Mercury Mystique has a bolt pattern of 4x108.
This means it is a 4 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mercury Mystique appears from 1995 to 2000 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x108 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x108:
2000 Mercury Mystique — Frequently Asked Questions
What is the bolt pattern for a 2000 Mercury Mystique?
The 2000 Mercury Mystique uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.3mm and the offset is 35-45mmmm.
What other years of Mercury Mystique have the same bolt pattern as the 2000?
The Mercury Mystique uses the 4x108 pattern from 1995 through 2000. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use spacers on my 2000 Mercury Mystique?
Yes, but ensure the wheel spacers match the 4x108 bolt pattern and 63.3mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
What lug nut size does the 2000 Mercury Mystique use?
The 2000 Mercury Mystique uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2000 Mercury Mystique?
Absolutely. Just ensure the aftermarket wheels have a 4x108 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 63.3mm (using hub rings if larger).
What is the factory wheel offset for a 2000 Mercury Mystique?
The OEM offset for the 2000 Mystique is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Mercury Mystique is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2000 (6 model years).
- Observed bolt-pattern variants: 1 (4x108).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Mercury Mystique, please report it via our About page contact so we can verify and update this record.