2008 MINI Convertible Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 MINI Convertible, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Convertible — Year-Specific Fitment Context
The 2008 MINI Convertible is in year 4 of 9 using the 4x100 pattern (2005–2013). Wheels from any 2005–2013 MINI Convertible are cross-compatible with the 2008 model. Across its full production run (2005–2024), the Convertible has also used: 5x112.
MINI Convertible Bolt Pattern by Year
The table below shows how the Convertible's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 4x100 | 56.1 | 45 |
| 2006 | 4x100 | 56.1 | 45 |
| 2007 | 4x100 | 56.1 | 45 |
| ▸ 2008 | 4x100 | 56.1 | 45 |
| 2009 | 4x100 | 56.1 | 45 |
| 2010 | 4x100 | 56.1 | 45 |
| 2011 | 4x100 | 56.1 | 45 |
| 2012 | 4x100 | 56.1 | 45 |
| 2013 | 4x100 | 56.1 | 45 |
| 2014 | 5x112 | 66.6 | 54 |
| 2015 | 5x112 | 66.6 | 54 |
| 2016 | 5x112 | 66.6 | 54 |
| 2017 | 5x112 | 66.6 | 54 |
| 2018 | 5x112 | 66.6 | 54 |
| 2019 | 5x112 | 66.6 | 54 |
| 2021 | 5x112 | 66.6 | 54 |
| 2022 | 5x112 | 66.6 | 54 |
| 2023 | 5x112 | 66.6 | 54 |
| 2024 | 5x112 | 66.6 | 54 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2008 MINI Convertible
The 2008 MINI Convertible uses a 4x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.25) and seat type—either cone or ball seat, matching the wheel's design. Improper lug nuts can lead to wheel loosening. For safety, verify that aftermarket wheels are hub-centric or use rings, and avoid excessive offset changes.
Historical Fitment Data Reference
In our dataset, MINI Convertible appears from 2005 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x112).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 9.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm or above 50mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 MINI Convertible — Frequently Asked Questions
What is the bolt pattern for a 2008 MINI Convertible?
The 2008 MINI Convertible uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of MINI Convertible have the same bolt pattern as the 2008?
The MINI Convertible uses the 4x100 pattern from 2005 through 2013. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 MINI Convertible?
The OEM offset for the 2008 Convertible is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another MINI fit my 2008 Convertible?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
Can I use spacers on my 2008 MINI Convertible?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
What is the center bore of a 2008 MINI Convertible?
The factory center bore (hub bore) for the 2008 MINI Convertible is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset