2006 Mitsubishi Endeavor Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Mitsubishi Endeavor, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Endeavor — Year-Specific Fitment Context
The 2006 Mitsubishi Endeavor is in year 3 of 8 using the 5x114.3 pattern (2004–2011). Wheels from any 2004–2011 Mitsubishi Endeavor are cross-compatible with the 2006 model.
Mitsubishi Endeavor Bolt Pattern by Year
The table below shows how the Endeavor's wheel specifications have changed over the years. The 2006 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Mitsubishi Endeavor
For your 2006 Mitsubishi Endeavor, the bolt pattern is 5x114.3mm with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 38-46mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Never use ball-seat lug nuts on conical wheels, as this can cause loosening and wheel detachment. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Endeavor appears from 2004 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 67.1mm bore exactly.
- ✅ Avoid spacers; if necessary, use hub-centric spacers and longer studs to maintain safety.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Mitsubishi Endeavor — Frequently Asked Questions
What is the bolt pattern for a 2006 Mitsubishi Endeavor?
The 2006 Mitsubishi Endeavor uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Endeavor have the same bolt pattern as the 2006?
The Mitsubishi Endeavor uses the 5x114.3 pattern from 2004 through 2011. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What does 38-46mm offset mean for the 2006 Endeavor?
An offset of 38-46mm means the wheel's mounting surface is 38-46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
What is the PCD for a 2006 Mitsubishi Endeavor?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Endeavor, the PCD is 5x114.3.
What is the factory wheel offset for a 2006 Mitsubishi Endeavor?
The OEM offset for the 2006 Endeavor is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2006 Mitsubishi Endeavor?
The factory center bore (hub bore) for the 2006 Mitsubishi Endeavor is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset