2008 Mitsubishi Endeavor Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Mitsubishi Endeavor, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Endeavor — Year-Specific Fitment Context
The 2008 Mitsubishi Endeavor is in year 5 of 8 using the 5x114.3 pattern (2004–2011). Wheels from any 2004–2011 Mitsubishi Endeavor are cross-compatible with the 2008 model.
Mitsubishi Endeavor Bolt Pattern by Year
The table below shows how the Endeavor's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Mitsubishi Endeavor
For your 2008 Mitsubishi Endeavor, the critical specs are: bolt pattern 5x114.3, center bore 67.1mm, offset 38-46mm, and lug nuts 12x1.5 with a conical seat. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is tight; deviating beyond 38-46mm may cause rubbing or clearance issues with suspension and brakes. Always use the correct lug nut thread pitch (12x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Re-torque after 50-100 miles. Wheels from 2004-2011 Endeavors are direct fit.
Historical Fitment Data Reference
In our dataset, Mitsubishi Endeavor appears from 2004 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Hub-centric rings are mandatory for aftermarket wheels with a larger bore to avoid steering wheel vibration.
- ✅ Stick to the 38-46mm offset range; lower offset (e.g., 35mm) may rub the fender, higher (e.g., 50mm) may contact the strut.
- ✅ Use only conical seat lug nuts (60-degree taper) with 12x1.5 thread; ball seat or incorrect thread can cause wheel failure.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Mitsubishi Endeavor — Frequently Asked Questions
What is the bolt pattern for a 2008 Mitsubishi Endeavor?
The 2008 Mitsubishi Endeavor uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Endeavor have the same bolt pattern as the 2008?
The Mitsubishi Endeavor uses the 5x114.3 pattern from 2004 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Mitsubishi Endeavor?
The OEM offset for the 2008 Endeavor is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2008 Mitsubishi Endeavor?
The factory center bore (hub bore) for the 2008 Mitsubishi Endeavor is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 Mitsubishi?
The 2008 Endeavor uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 67.1mm center bore important for the 2008 Endeavor?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset