2011 Mitsubishi Endeavor Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mitsubishi Endeavor, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Endeavor — Year-Specific Fitment Context
The 2011 model year is the final year of the Mitsubishi Endeavor's 5x114.3 bolt pattern run (since 2004). Wheels from any 2004–2011 Mitsubishi Endeavor are cross-compatible with the 2011 model.
Mitsubishi Endeavor Bolt Pattern by Year
The table below shows how the Endeavor's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Mitsubishi Endeavor
For the 2011 Mitsubishi Endeavor, the bolt pattern is 5x114.3mm with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 38-46mm; deviating risks rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat type (cone or ball) matching the wheel. Improper lug nuts can cause wheel loosening. Verify wheel load rating meets or exceeds OEM specs. This final year shares fitment with 2004-2011 Endeavors.
Historical Fitment Data Reference
In our dataset, Mitsubishi Endeavor appears from 2004 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub rings; the 67.1mm bore is smaller than most aftermarket wheels.
- ✅ Check inner clearance for brake calipers and suspension components, especially with lower offset wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mitsubishi Endeavor — Frequently Asked Questions
What is the bolt pattern for a 2011 Mitsubishi Endeavor?
The 2011 Mitsubishi Endeavor uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Endeavor have the same bolt pattern as the 2011?
The Mitsubishi Endeavor uses the 5x114.3 pattern from 2004 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Do 2011 Mitsubishi Endeavors use lug bolts or lug nuts?
The 2011 Endeavor requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 67.1mm center bore important for the 2011 Endeavor?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Mitsubishi fit my 2011 Endeavor?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
How do I measure the bolt pattern on my 2011 Mitsubishi?
The 2011 Endeavor uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset