1992 Mitsubishi Expo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Mitsubishi Expo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Expo — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Mitsubishi Expo's 5x114.3 bolt pattern era, which continued through 1995 (4 consecutive years). Wheels from any 1992–1995 Mitsubishi Expo are cross-compatible with the 1992 model.
Mitsubishi Expo Bolt Pattern by Year
The table below shows how the Expo's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Mitsubishi Expo
For your 1992 Mitsubishi Expo, the 5x114.3 bolt pattern is shared with 1992-1995 models. The 67.1mm center bore is critical; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stick to 38-46mm to avoid rubbing or poor handling. Use only 12x1.5 lug nuts with the correct seat (cone or ball) matching your wheels; mismatched seats can cause loosening. Always torque to spec and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Expo appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 67.1mm; outer diameter must match wheel bore.
- ✅ Avoid wheels with offset below 38mm (rubbing on strut) or above 46mm (rubbing on fender).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Mitsubishi Expo — Frequently Asked Questions
What is the bolt pattern for a 1992 Mitsubishi Expo?
The 1992 Mitsubishi Expo uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Expo have the same bolt pattern as the 1992?
The Mitsubishi Expo uses the 5x114.3 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the factory wheel offset for a 1992 Mitsubishi Expo?
The OEM offset for the 1992 Expo is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 1992 Mitsubishi Expo?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
What does 38-46mm offset mean for the 1992 Expo?
An offset of 38-46mm means the wheel's mounting surface is 38-46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
Do 1992 Mitsubishi Expos use lug bolts or lug nuts?
The 1992 Expo requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset