1993 Mitsubishi Expo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Mitsubishi Expo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Expo — Year-Specific Fitment Context
The 1993 Mitsubishi Expo is in year 2 of 4 using the 5x114.3 pattern (1992–1995). Wheels from any 1992–1995 Mitsubishi Expo are cross-compatible with the 1993 model.
Mitsubishi Expo Bolt Pattern by Year
The table below shows how the Expo's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Mitsubishi Expo
For your 1993 Mitsubishi Expo, the 5x114.3 bolt pattern is shared with 1992–1995 models, ensuring cross-compatibility. The 67.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 38–46mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (cone or ball) to avoid loosening or damage. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Mitsubishi Expo appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 38mm (too aggressive) or above 46mm (too tucked) to prevent clearance issues.
- ✅ Check that aftermarket wheels include hub-centric rings sized for 67.1mm; otherwise, order separately.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Mitsubishi Expo — Frequently Asked Questions
What is the bolt pattern for a 1993 Mitsubishi Expo?
The 1993 Mitsubishi Expo uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Expo have the same bolt pattern as the 1993?
The Mitsubishi Expo uses the 5x114.3 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What does 38-46mm offset mean for the 1993 Expo?
An offset of 38-46mm means the wheel's mounting surface is 38-46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
How tight should I torque the lug nuts on a 1993 Mitsubishi Expo?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1993 Mitsubishi Expo?
The OEM offset for the 1993 Expo is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1993 Mitsubishi Expo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Expo, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset