2021 Mitsubishi Mirage G4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Mitsubishi Mirage G4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2021 Mirage G4 — Year-Specific Fitment Context
The 2021 Mitsubishi Mirage G4 is in year 5 of 8 using the 4x100 pattern (2017–2024). Wheels from any 2017–2024 Mitsubishi Mirage G4 are cross-compatible with the 2021 model.
Mitsubishi Mirage G4 Bolt Pattern by Year
The table below shows how the Mirage G4's wheel specifications have changed over the years. The 2021 model year is highlighted.
Fitment Notes
The 2021 Mitsubishi Mirage G4 has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mitsubishi Mirage G4 appears from 2017 to 2024 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2021 Mitsubishi Mirage G4 — Frequently Asked Questions
What is the bolt pattern for a 2021 Mitsubishi Mirage G4?
The 2021 Mitsubishi Mirage G4 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Mitsubishi Mirage G4 have the same bolt pattern as the 2021?
The Mitsubishi Mirage G4 uses the 4x100 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the PCD for a 2021 Mitsubishi Mirage G4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 Mirage G4, the PCD is 4x100.
What lug nut size does the 2021 Mitsubishi Mirage G4 use?
The 2021 Mitsubishi Mirage G4 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2021 Mitsubishi Mirage G4?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 46mm offset mean for the 2021 Mirage G4?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mitsubishi Mirage G4 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2017-2024 (8 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2021 Mitsubishi Mirage G4, please report it via our About page contact so we can verify and update this record.