2002 Mitsubishi Montero Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Mitsubishi Montero, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Montero — Year-Specific Fitment Context
The 2002 Mitsubishi Montero is in year 11 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 Mitsubishi Montero are cross-compatible with the 2002 model.
Mitsubishi Montero Bolt Pattern by Year
The table below shows how the Montero's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 5x114.3 | 67.1 | 38-46 |
| 2005 | 5x114.3 | 67.1 | 38-46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Mitsubishi Montero
For your 2002 Mitsubishi Montero, the bolt pattern is 5x114.3mm, but critical fitment factors are center bore and offset. The factory center bore is 67.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 38-46mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong seat can lead to loose wheels and accidents. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Mitsubishi Montero appears from 1992 to 2006 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm they are hub-centric or purchase 67.1mm hub rings.
- ✅ Avoid spacers unless necessary; they alter offset and may require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Mitsubishi Montero — Frequently Asked Questions
What is the bolt pattern for a 2002 Mitsubishi Montero?
The 2002 Mitsubishi Montero uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Montero have the same bolt pattern as the 2002?
The Mitsubishi Montero uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What lug nut size does the 2002 Mitsubishi Montero use?
The 2002 Mitsubishi Montero uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2002 Mitsubishi Montero?
The OEM offset for the 2002 Montero is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2002 Mitsubishi Montero?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Montero, the PCD is 5x114.3.
What is the center bore of a 2002 Mitsubishi Montero?
The factory center bore (hub bore) for the 2002 Mitsubishi Montero is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset