2000 Mitsubishi Montero Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Mitsubishi Montero, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Montero — Year-Specific Fitment Context
The 2000 Mitsubishi Montero is in year 9 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 Mitsubishi Montero are cross-compatible with the 2000 model.
Mitsubishi Montero Bolt Pattern by Year
The table below shows how the Montero's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 5x114.3 | 67.1 | 38-46 |
| 2005 | 5x114.3 | 67.1 | 38-46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Mitsubishi Montero
For your 2000 Mitsubishi Montero, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 38-46mm; deviating risks rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat type—cone or ball seat—matching your wheels. Mismatched seats can cause wheel loosening. Verify lug nut torque to spec and re-torque after 50-100 miles. Wheels from 1992-2006 Montero models are direct fit.
Historical Fitment Data Reference
In our dataset, Mitsubishi Montero appears from 1992 to 2006 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 67.1mm center bore.
- ✅ Avoid wheels with offset below 38mm or above 46mm to prevent clearance issues with suspension and body.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Mitsubishi Montero — Frequently Asked Questions
What is the bolt pattern for a 2000 Mitsubishi Montero?
The 2000 Mitsubishi Montero uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Montero have the same bolt pattern as the 2000?
The Mitsubishi Montero uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2000 Mitsubishi?
The 2000 Montero uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2000 Mitsubishi Monteros use lug bolts or lug nuts?
The 2000 Montero requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2000 Mitsubishi Montero use?
The 2000 Mitsubishi Montero uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2000 Mitsubishi Montero?
The OEM offset for the 2000 Montero is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset