1993 Mitsubishi Montero Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Mitsubishi Montero, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Montero — Year-Specific Fitment Context
The 1993 Mitsubishi Montero is in year 2 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 Mitsubishi Montero are cross-compatible with the 1993 model.
Mitsubishi Montero Bolt Pattern by Year
The table below shows how the Montero's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| ▸ 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 5x114.3 | 67.1 | 38-46 |
| 2005 | 5x114.3 | 67.1 | 38-46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Mitsubishi Montero
For your 1993 Mitsubishi Montero, the bolt pattern is 5x114.3mm with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 38-46mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Mixing seat types can lead to loose wheels. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Mitsubishi Montero appears from 1992 to 2006 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, check that the center bore is at least 67.1mm and use hub-centric rings if larger.
- ✅ Avoid using wheels from other Mitsubishi models (e.g., Eclipse) as they may have different offset and bore sizes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Mitsubishi Montero — Frequently Asked Questions
What is the bolt pattern for a 1993 Mitsubishi Montero?
The 1993 Mitsubishi Montero uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Montero have the same bolt pattern as the 1993?
The Mitsubishi Montero uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the factory wheel offset for a 1993 Mitsubishi Montero?
The OEM offset for the 1993 Montero is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 1993 Mitsubishi?
The 1993 Montero uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 1993 Mitsubishi Monteros use lug bolts or lug nuts?
The 1993 Montero requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 1993 Mitsubishi Montero?
The factory center bore (hub bore) for the 1993 Mitsubishi Montero is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset