2012 Nissan Armada Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Nissan Armada, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 24 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2012 Armada — Year-Specific Fitment Context
The 2012 Nissan Armada is in year 8 of 20 using the 6x139.7 pattern (2005–2024). Wheels from any 2005–2024 Nissan Armada are cross-compatible with the 2012 model.
Nissan Armada Bolt Pattern by Year
The table below shows how the Armada's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 6x139.7 | 78.1 | 24 |
| 2006 | 6x139.7 | 78.1 | 24 |
| 2007 | 6x139.7 | 78.1 | 24 |
| 2008 | 6x139.7 | 78.1 | 24 |
| 2009 | 6x139.7 | 78.1 | 24 |
| 2010 | 6x139.7 | 78.1 | 24 |
| 2011 | 6x139.7 | 78.1 | 24 |
| ▸ 2012 | 6x139.7 | 78.1 | 24 |
| 2013 | 6x139.7 | 78.1 | 24 |
| 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 77.8 | 25 |
| 2018 | 6x139.7 | 77.8 | 25 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2012 Nissan Armada
For your 2012 Nissan Armada, the 6x139.7 bolt pattern is shared across 2005–2024 models, ensuring broad wheel compatibility. However, the 78.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 24mm; staying within ±5mm maintains suspension geometry and avoids rubbing. Always match the 12x1.25 lug nut thread pitch and use conical (60-degree) seat nuts for steel or aftermarket wheels—ball seat nuts are for OEM wheels only. Failure to use correct lug nuts can cause wheel detachment. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Nissan Armada appears from 2005 to 2024 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric rings are installed to match the 78.1mm center bore.
- ✅ Avoid wheels with offset below 19mm or above 29mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Nissan Armada — Frequently Asked Questions
What is the bolt pattern for a 2012 Nissan Armada?
The 2012 Nissan Armada uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 24mm.
What other years of Nissan Armada have the same bolt pattern as the 2012?
The Nissan Armada uses the 6x139.7 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2012 Nissan Armada?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 78.1mm center bore important for the 2012 Armada?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2012 Nissan Armada?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Can I put aftermarket wheels on my 2012 Nissan Armada?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 24mm, and a center bore of at least 78.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset