2011 Nissan JUKE Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Nissan JUKE, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.25
Center Bore (CB) 66.1 mm
Offset (ET) 40
Torque Specs 80 ft-lbs (108 Nm)

2011 JUKE — Year-Specific Fitment Context

The 2011 model year marks the beginning of the Nissan JUKE's 5x114.3 bolt pattern era, which continued through 2017 (7 consecutive years). Wheels from any 2011–2017 Nissan JUKE are cross-compatible with the 2011 model.

Nissan JUKE Bolt Pattern by Year

The table below shows how the JUKE's wheel specifications have changed over the years. The 2011 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2011 5x114.3 66.1 40
2012 5x114.3 66.1 40
2013 5x114.3 66.1 40
2014 5x114.3 66.1 40
2015 5x114.3 66.1 40
2016 5x114.3 66.1 40
2017 5x114.3 66.1 40

Fitment Notes

The 2011 Nissan JUKE has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Nissan JUKE appears from 2011 to 2017 (7 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2011 Nissan JUKE — Frequently Asked Questions

What is the bolt pattern for a 2011 Nissan JUKE?

The 2011 Nissan JUKE uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.

What other years of Nissan JUKE have the same bolt pattern as the 2011?

The Nissan JUKE uses the 5x114.3 pattern from 2011 through 2017. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.

Do 2011 Nissan JUKEs use lug bolts or lug nuts?

The 2011 JUKE requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

How tight should I torque the lug nuts on a 2011 Nissan JUKE?

Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Can I use spacers on my 2011 Nissan JUKE?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.

What does 40mm offset mean for the 2011 JUKE?

An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Nissan JUKE is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2011 Nissan JUKE, please report it via our About page contact so we can verify and update this record.

Nissan JUKE By Year

2011 2012 2013 2014 2015 2016 2017

Other Nissan Models

240SX Altima Ariya Armada Frontier Crew Cab Frontier King Cab GT-R JUKE Kicks Maxima NV200 NV200 Taxi NV2500 HD Cargo Pathfinder Quest Regular Cab TITAN Single Cab TITAN XD Crew Cab TITAN XD King Cab Titan King Cab