2018 Nissan Maxima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Nissan Maxima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Maxima — Year-Specific Fitment Context
The 2018 Nissan Maxima is in year 27 of 32 using the 5x114.3 pattern (1992–2023). Wheels from any 1992–2023 Nissan Maxima are cross-compatible with the 2018 model.
Nissan Maxima Bolt Pattern by Year
The table below shows how the Maxima's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 35-45 |
| 1993 | 5x114.3 | 66.1 | 40 |
| 1994 | 5x114.3 | 66.1 | 40 |
| 1995 | 5x114.3 | 66.1 | 40 |
| 1996 | 5x114.3 | 66.1 | 40 |
| 1997 | 5x114.3 | 66.1 | 40 |
| 1998 | 5x114.3 | 66.1 | 40 |
| 1999 | 5x114.3 | 66.1 | 40 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| ▸ 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Nissan Maxima
For your 2018 Nissan Maxima, the 5x114.3 bolt pattern is shared with all Maximas from 1992–2023, so wheels from those years fit. However, the center bore is 66.1mm; aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The stock offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or flat seats. Incorrect lug nuts can cause wheel loosening. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Maxima appears from 1992 to 2023 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lb after 50–100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 66.1mm center bore.
- ✅ Avoid spacers thicker than 5mm without extended studs; verify clearance with the strut and fender.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Nissan Maxima — Frequently Asked Questions
What is the bolt pattern for a 2018 Nissan Maxima?
The 2018 Nissan Maxima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Maxima have the same bolt pattern as the 2018?
The Nissan Maxima uses the 5x114.3 pattern from 1992 through 2023. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What lug nut size does the 2018 Nissan Maxima use?
The 2018 Nissan Maxima uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2018 Nissan Maxima?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Maxima, the PCD is 5x114.3.
Do 2018 Nissan Maximas use lug bolts or lug nuts?
The 2018 Maxima requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Nissan fit my 2018 Maxima?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset