2004 Nissan Maxima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Nissan Maxima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2004 Maxima — Year-Specific Fitment Context
The 2004 Nissan Maxima is in year 13 of 32 using the 5x114.3 pattern (1992–2023). Wheels from any 1992–2023 Nissan Maxima are cross-compatible with the 2004 model.
Nissan Maxima Bolt Pattern by Year
The table below shows how the Maxima's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 35-45 |
| 1993 | 5x114.3 | 66.1 | 40 |
| 1994 | 5x114.3 | 66.1 | 40 |
| 1995 | 5x114.3 | 66.1 | 40 |
| 1996 | 5x114.3 | 66.1 | 40 |
| 1997 | 5x114.3 | 66.1 | 40 |
| 1998 | 5x114.3 | 66.1 | 40 |
| 1999 | 5x114.3 | 66.1 | 40 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| ▸ 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2004 Nissan Maxima
For your 2004 Nissan Maxima, the 5x114.3 bolt pattern is shared across 1992–2023 models, ensuring broad compatibility. However, the 66.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory spec is 40mm, but a range of 35–45mm is acceptable. Deviating beyond this may cause rubbing or clearance issues with suspension and fenders. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper). Flat or ball-seat nuts can loosen or damage the wheel. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Maxima appears from 1992 to 2023 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations may occur at highway speeds.
- ✅ Check inner clearance when using wider wheels or lower offsets; the strut housing is a common interference point.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Nissan Maxima — Frequently Asked Questions
What is the bolt pattern for a 2004 Nissan Maxima?
The 2004 Nissan Maxima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Maxima have the same bolt pattern as the 2004?
The Nissan Maxima uses the 5x114.3 pattern from 1992 through 2023. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
What is the center bore of a 2004 Nissan Maxima?
The factory center bore (hub bore) for the 2004 Nissan Maxima is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2004 Nissan Maximas use lug bolts or lug nuts?
The 2004 Maxima requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 40mm offset mean for the 2004 Maxima?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
How do I measure the bolt pattern on my 2004 Nissan?
The 2004 Maxima uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset