1992 Nissan Stanza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Nissan Stanza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Stanza — Year-Specific Fitment Context
The 1992 is the only model year of the Nissan Stanza in our database using the 4x114.3 bolt pattern.
Fitment Notes
The 1992 Nissan Stanza has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan Stanza appears from 1992 to 1992 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
1992 Nissan Stanza — Frequently Asked Questions
What is the bolt pattern for a 1992 Nissan Stanza?
The 1992 Nissan Stanza uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mmmm.
What lug nut size does the 1992 Nissan Stanza use?
The 1992 Nissan Stanza uses M12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 1992 Nissan Stanza?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the PCD for a 1992 Nissan Stanza?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 Stanza, the PCD is 4x114.3.
Why is matching the 66.1mm center bore important for the 1992 Stanza?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Nissan fit my 1992 Stanza?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan Stanza is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1992 (1 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1992 Nissan Stanza, please report it via our About page contact so we can verify and update this record.