2008 Nissan Titan King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Nissan Titan King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Titan King Cab — Year-Specific Fitment Context
The 2008 Nissan Titan King Cab is in year 2 of 12 using the 6x114.3 pattern (2007–2018). Wheels from any 2007–2018 Nissan Titan King Cab are cross-compatible with the 2008 model. Across its full production run (2004–2024), the Titan King Cab has also used: 6x139.7.
Nissan Titan King Cab Bolt Pattern by Year
The table below shows how the Titan King Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| ▸ 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2008 Nissan Titan King Cab
For your 2008 Nissan Titan King Cab, the 6x114.3 bolt pattern is shared with 2007–2018 Titans, ensuring cross-compatibility. The 66.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset sensitivity is high; the factory 30mm offset is optimal for suspension geometry and brake clearance. Deviating more than ±10mm may cause rubbing or handling issues. Always use the correct lug nuts: M12x1.25 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen, leading to wheel detachment. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Titan King Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50 miles of driving.
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 66.1mm.
- ✅ Avoid spacers unless hub-centric and properly torqued; they alter offset and load.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Nissan Titan King Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 Nissan Titan King Cab?
The 2008 Nissan Titan King Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Titan King Cab have the same bolt pattern as the 2008?
The Nissan Titan King Cab uses the 6x114.3 pattern from 2007 through 2018. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Nissan Titan King Cab?
The OEM offset for the 2008 Titan King Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2008 Nissan Titan King Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
What does 30mm offset mean for the 2008 Titan King Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Will wheels from another Nissan fit my 2008 Titan King Cab?
Only if they share the exact same 6x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset