2022 Nissan Titan King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Nissan Titan King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2022 Titan King Cab — Year-Specific Fitment Context
The 2022 Nissan Titan King Cab is in year 19 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Nissan Titan King Cab are cross-compatible with the 2022 model. Across its full production run (2004–2024), the Titan King Cab has also used: 6x114.3.
Nissan Titan King Cab Bolt Pattern by Year
The table below shows how the Titan King Cab's wheel specifications have changed over the years. The 2022 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| ▸ 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2022 Nissan Titan King Cab
For the 2022 Nissan Titan King Cab, the 6x139.7 bolt pattern and 77.8mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 78.1mm or 106.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 25mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.25 thread pitch and a 60-degree conical seat—using incorrect seat types (e.g., ball seat) can lead to wheel loosening. Re-torque after 50-100 miles. Wheels from 2004-2024 Titan King Cab models are cross-compatible, but verify center bore and offset.
Historical Fitment Data Reference
In our dataset, Nissan Titan King Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 15mm or above 35mm to prevent rubbing on suspension or fenders.
- ✅ If using aftermarket wheels, always install hub-centric rings (77.8mm ID to wheel's bore OD) to eliminate vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Nissan Titan King Cab — Frequently Asked Questions
What is the bolt pattern for a 2022 Nissan Titan King Cab?
The 2022 Nissan Titan King Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan Titan King Cab have the same bolt pattern as the 2022?
The Nissan Titan King Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
What is the factory wheel offset for a 2022 Nissan Titan King Cab?
The OEM offset for the 2022 Titan King Cab is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 25mm offset mean for the 2022 Titan King Cab?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the PCD for a 2022 Nissan Titan King Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Titan King Cab, the PCD is 6x139.7.
Why is matching the 77.8mm center bore important for the 2022 Titan King Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset