2017 Nissan Titan King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Nissan Titan King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 Titan King Cab — Year-Specific Fitment Context
The 2017 Nissan Titan King Cab is in year 11 of 12 using the 6x114.3 pattern (2007–2018). Wheels from any 2007–2018 Nissan Titan King Cab are cross-compatible with the 2017 model. Across its full production run (2004–2024), the Titan King Cab has also used: 6x139.7.
Nissan Titan King Cab Bolt Pattern by Year
The table below shows how the Titan King Cab's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| ▸ 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2017 Nissan Titan King Cab
For your 2017 Nissan Titan King Cab, the 6x114.3 bolt pattern is shared with 2007–2018 models, ensuring cross-compatibility. The 66.1mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. Offset sensitivity is high; the factory 45mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use the correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen, leading to wheel detachment. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Titan King Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50 miles of driving, then periodically check.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing or bearing stress.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings to match 66.1mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Nissan Titan King Cab — Frequently Asked Questions
What is the bolt pattern for a 2017 Nissan Titan King Cab?
The 2017 Nissan Titan King Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of Nissan Titan King Cab have the same bolt pattern as the 2017?
The Nissan Titan King Cab uses the 6x114.3 pattern from 2007 through 2018. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the PCD for a 2017 Nissan Titan King Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Titan King Cab, the PCD is 6x114.3.
What is the center bore of a 2017 Nissan Titan King Cab?
The factory center bore (hub bore) for the 2017 Nissan Titan King Cab is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2017 Nissan Titan King Cab?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2017 Nissan Titan King Cab use?
The 2017 Nissan Titan King Cab uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset