2026 Toyota 4Runner Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota 4Runner is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 15-25, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 97 ft-lbs (131 Nm).
2026 Toyota 4Runner Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 95.1 mm |
| Offset Range (ET) | 15-25 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 97 ft-lbs (131 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2026 4Runner — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota 4Runner's 6x139.7 bolt pattern run (since 1992). Wheels from any 1992–2026 Toyota 4Runner are cross-compatible with the 2026 model. Across its full production run (1992–2026), the 4Runner has also used: 5x114.3.
Toyota 4Runner Bolt Pattern by Year
Looking for all generations? View the complete Toyota 4Runner (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the 4Runner's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 30 |
| 1993 | 6x139.7 | 106.1 | 30 |
| 1994 | 6x139.7 | 106.1 | 30 |
| 1995 | 6x139.7 | 106.1 | 30 |
| 1996 | 6x139.7 | 106.1 | 30 |
| 1997 | 6x139.7 | 106.1 | 12 |
| 1998 | 6x139.7 | 106.1 | 12 |
| 1999 | 6x139.7 | 106.1 | 12 |
| 2000 | 6x139.7 | 106.1 | 12 |
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 5x114.3 | 106.1 | 12 |
| 2003 | 5x114.3 | 60.1 | 12 |
| 2004 | 5x114.3 | 60.1 | 25 |
| 2005 | 5x114.3 | 60.1 | 25-30 |
| 2006 | 5x114.3 | 60.1 | 25-30 |
| 2007 | 5x114.3 | 60.1 | 25-30 |
| 2008 | 5x114.3 | 60.1 | 25-30 |
| 2009 | 5x114.3 | 106.1 | 25-30 |
| 2010 | 5x114.3 | 60.1 | 25-30 |
| 2011 | 5x114.3 | 60.1 | 25-30 |
| 2012 | 5x114.3 | 60.1 | 25-30 |
| 2013 | 5x114.3 | 60.1 | 25-30 |
| 2014 | 5x114.3 | 60.1 | 25-30 |
| 2015 | 5x114.3 | 60.1 | 25-30 |
| 2016 | 5x114.3 | 60.1 | 25-30 |
| 2017 | 5x114.3 | 60.1 | 25-30 |
| 2018 | 5x114.3 | 60.1 | 25-30 |
| 2019 | 5x114.3 | 60.1 | 25-30 |
| 2020 | 6x139.7 | 106.2 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
| 2025 | 6x139.7 | 95.1 | 15-25 |
| ▸ 2026 | 6x139.7 | 95.1 | 15-25 |
2026 Toyota 4Runner Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 Toyota 4Runner, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Lexus LX | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2024 Toyota Land Cruiser | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2023 Toyota Sequoia | 95.1 mm (Exact) | 25 | 14x1.5 (Flat/Mag) |
| 2025 Toyota Tacoma | 95.1 mm (Exact) | 25-35 | 14x1.5 (Flat) |
| 2025 Toyota Tundra | 95.1 mm (Exact) | 60 | 14x1.5 (Flat) |
| 2022 Toyota Tundra CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Isuzu NPR | 110 mm | 110mm → 95.1mm |
Not Applicable |
| 2025 Isuzu NPR-HD | 110 mm | 110mm → 95.1mm |
Not Applicable |
| 2008 Lexus GX | 106.1 mm | 106.1mm → 95.1mm |
25 |
| 2006 Nissan Armada | 110.1 mm | 110.1mm → 95.1mm |
24 |
| 1994 Nissan Pathfinder | 110.0 mm | 110.0mm → 95.1mm |
40 |
| 2007 Nissan Titan Crew Cab | 110.1 mm | 110.1mm → 95.1mm |
25 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 97 ft-lbs (131 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota 4Runner — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota 4Runner?
The 2026 Toyota 4Runner uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 15-25mm.
What other years of Toyota 4Runner have the same bolt pattern as the 2026?
The Toyota 4Runner uses the 6x139.7 pattern from 1992 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 Toyota 4Runner use?
The 2026 Toyota 4Runner uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 95.1mm center bore important for the 2026 4Runner?
The 95.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2026 Toyota 4Runner?
The factory center bore (hub bore) for the 2026 Toyota 4Runner is 95.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Toyota fit my 2026 4Runner?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 95.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →