2014 Toyota 4Runner Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Toyota 4Runner is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 25-30, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Toyota 4Runner Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 25-30 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 4Runner β Year-Specific Fitment Context
The 2014 Toyota 4Runner is in year 13 of 18 using the 5x114.3 pattern (2002β2019). Wheels from any 2002β2019 Toyota 4Runner are cross-compatible with the 2014 model. Across its full production run (1992β2025), the 4Runner has also used: 6x139.7.
Toyota 4Runner Bolt Pattern by Year
The table below shows how the 4Runner's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 30 |
| 1993 | 6x139.7 | 106.1 | 30 |
| 1994 | 6x139.7 | 106.1 | 30 |
| 1995 | 6x139.7 | 106.1 | 30 |
| 1996 | 6x139.7 | 106.1 | 30 |
| 1997 | 6x139.7 | 106.1 | 12 |
| 1998 | 6x139.7 | 106.1 | 12 |
| 1999 | 6x139.7 | 106.1 | 12 |
| 2000 | 6x139.7 | 106.1 | 12 |
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 5x114.3 | 106.1 | 12 |
| 2003 | 5x114.3 | 60.1 | 12 |
| 2004 | 5x114.3 | 60.1 | 25 |
| 2005 | 5x114.3 | 60.1 | 25-30 |
| 2006 | 5x114.3 | 60.1 | 25-30 |
| 2007 | 5x114.3 | 60.1 | 25-30 |
| 2008 | 5x114.3 | 60.1 | 25-30 |
| 2009 | 5x114.3 | 106.1 | 25-30 |
| 2010 | 5x114.3 | 60.1 | 25-30 |
| 2011 | 5x114.3 | 60.1 | 25-30 |
| 2012 | 5x114.3 | 60.1 | 25-30 |
| 2013 | 5x114.3 | 60.1 | 25-30 |
| βΈ 2014 | 5x114.3 | 60.1 | 25-30 |
| 2015 | 5x114.3 | 60.1 | 25-30 |
| 2016 | 5x114.3 | 60.1 | 25-30 |
| 2017 | 5x114.3 | 60.1 | 25-30 |
| 2018 | 5x114.3 | 60.1 | 25-30 |
| 2019 | 5x114.3 | 60.1 | 25-30 |
| 2020 | 6x139.7 | 106.2 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
| 2025 | 6x139.7 | 95.1 | 15-25 |
2014 Toyota 4Runner Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 Toyota 4Runner, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD β ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Ford Mustang | 70.3 mm | 70.3mm β 60.1mm |
30 |
| 2025 Ford Mustang GTD | 70.5 mm | 70.5mm β 60.1mm |
Not Applicable |
| 2021 Ford Mustang MACH-E | 70.5 mm | 70.5mm β 60.1mm |
35-45 |
| 1992 Ford Ranger Regular Cab | 70.5 mm | 70.5mm β 60.1mm |
12-20 |
| 1992 Ford Ranger Super Cab | 70.5 mm | 70.5mm β 60.1mm |
12-20 |
| 2009 Ford Taurus | 63.4 mm | 63.4mm β 60.1mm |
50 |
Expert Buying Guide for 2014 Toyota 4Runner
For the 2014 Toyota 4Runner, the 6x139.7 bolt pattern is shared across 1992β2024 models, ensuring broad compatibility. However, the 106.1mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 25β30mm; deviations risk rubbing on suspension or fenders. Always use 12x1.5 lug nuts with the correct seatβfactory wheels use conical (60-degree) seats, while aftermarket may require ball or tapered seats. Mismatched seats cause loose wheels and potential failure. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Toyota 4Runner appears from 1992 to 2025 (34 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- β Re-torque lug nuts after 50β100 miles of driving to maintain clamping force.
- β Avoid spacers unless hub-centric; they can alter offset and stress bearings.
- β Check inner clearance for brake calipers; some aftermarket wheels may require spacers or caliper grinding.
- β οΈ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- β οΈ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- β οΈ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- β οΈ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- β οΈ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2014 Toyota 4Runner β Frequently Asked Questions
What is the bolt pattern for a 2014 Toyota 4Runner?
The 2014 Toyota 4Runner uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 25-30mm.
What other years of Toyota 4Runner have the same bolt pattern as the 2014?
The Toyota 4Runner uses the 5x114.3 pattern from 2002 through 2019. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2014 Toyota 4Runner?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 25-30mm, and a center bore of at least 60.1mm (using hub rings if larger).
Why is matching the 60.1mm center bore important for the 2014 4Runner?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2014 Toyota 4Runner?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 4Runner, the PCD is 5x114.3.
What is the center bore of a 2014 Toyota 4Runner?
The factory center bore (hub bore) for the 2014 Toyota 4Runner is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992β2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →