2016 Toyota 4Runner Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Toyota 4Runner, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2016 4Runner — Year-Specific Fitment Context
The 2016 Toyota 4Runner is in year 25 of 33 using the 6x139.7 pattern (1992–2024). Wheels from any 1992–2024 Toyota 4Runner are cross-compatible with the 2016 model.
Toyota 4Runner Bolt Pattern by Year
The table below shows how the 4Runner's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 30 |
| 1993 | 6x139.7 | 106.1 | 30 |
| 1994 | 6x139.7 | 106.1 | 30 |
| 1995 | 6x139.7 | 106.1 | 30 |
| 1996 | 6x139.7 | 106.1 | 30 |
| 1997 | 6x139.7 | 106.1 | 12 |
| 1998 | 6x139.7 | 106.1 | 12 |
| 1999 | 6x139.7 | 106.1 | 12 |
| 2000 | 6x139.7 | 106.1 | 12 |
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 25 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| 2015 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2016 Toyota 4Runner
For your 2016 Toyota 4Runner, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 25-30mm to avoid rubbing on suspension or body. Always use 12x1.5 lug nuts with the correct seat—factory is conical (60-degree). Mixing seat types (e.g., ball seat) can cause wheel loosening. Verify lug nut engagement: at least 6-8 full turns. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota 4Runner appears from 1992 to 2024 (33 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 106.1mm center bore.
- ✅ Avoid wheels with offset below 25mm; they may rub the upper control arm or fender liner.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Toyota 4Runner — Frequently Asked Questions
What is the bolt pattern for a 2016 Toyota 4Runner?
The 2016 Toyota 4Runner uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota 4Runner have the same bolt pattern as the 2016?
The Toyota 4Runner uses the 6x139.7 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What does 25-30mm offset mean for the 2016 4Runner?
An offset of 25-30mm means the wheel's mounting surface is 25-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the center bore of a 2016 Toyota 4Runner?
The factory center bore (hub bore) for the 2016 Toyota 4Runner is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2016 Toyota 4Runner?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2016 Toyota 4Runner?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-30mm, and a center bore of at least 106.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset