2016 Nissan TITAN XD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Nissan TITAN XD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2016 TITAN XD Crew Cab — Year-Specific Fitment Context
The 2016 model year marks the beginning of the Nissan TITAN XD Crew Cab's 6x139.7 bolt pattern era, which continued through 2024 (9 consecutive years). Wheels from any 2016–2024 Nissan TITAN XD Crew Cab are cross-compatible with the 2016 model.
Nissan TITAN XD Crew Cab Bolt Pattern by Year
The table below shows how the TITAN XD Crew Cab's wheel specifications have changed over the years. The 2016 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2016 Nissan TITAN XD Crew Cab
For your 2016 Nissan TITAN XD Crew Cab, the 6x139.7 bolt pattern is shared with 2016–2024 models, ensuring broad wheel compatibility. The 77.8mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and hub damage. Offset sensitivity is critical: the factory 25mm offset maintains proper geometry; deviations affect handling and tire clearance. Always use 12x1.25 lug nuts with the correct seat type (conical or ball) matching the wheel. Improper thread pitch or seat can cause wheel detachment. Verify load rating exceeds vehicle weight. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Nissan TITAN XD Crew Cab appears from 2016 to 2024 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50–100 miles to ensure proper seating.
- ✅ Avoid wheels with offset below 0mm or above 40mm to prevent rubbing or suspension interference.
- ✅ Use hub-centric rings with 77.8mm bore to match the hub; plastic rings suffice for street use.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Nissan TITAN XD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2016 Nissan TITAN XD Crew Cab?
The 2016 Nissan TITAN XD Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan TITAN XD Crew Cab have the same bolt pattern as the 2016?
The Nissan TITAN XD Crew Cab uses the 6x139.7 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2016 Nissan TITAN XD Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 77.8mm center bore important for the 2016 TITAN XD Crew Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 25mm offset mean for the 2016 TITAN XD Crew Cab?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the center bore of a 2016 Nissan TITAN XD Crew Cab?
The factory center bore (hub bore) for the 2016 Nissan TITAN XD Crew Cab is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset