2018 Nissan TITAN XD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Nissan TITAN XD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2018 TITAN XD Crew Cab — Year-Specific Fitment Context
The 2018 Nissan TITAN XD Crew Cab is in year 3 of 9 using the 6x139.7 pattern (2016–2024). Wheels from any 2016–2024 Nissan TITAN XD Crew Cab are cross-compatible with the 2018 model.
Nissan TITAN XD Crew Cab Bolt Pattern by Year
The table below shows how the TITAN XD Crew Cab's wheel specifications have changed over the years. The 2018 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2018 Nissan TITAN XD Crew Cab
For your 2018 Nissan TITAN XD Crew Cab, the 6x139.7 bolt pattern is shared with 2016–2024 models, ensuring cross-compatibility. However, the center bore is 77.8mm—larger than many aftermarket wheels. You must use hub-centric rings (77.8mm OD to wheel hub ID) to prevent vibrations and ensure proper load distribution. Offset is critical: stock is 25mm; deviations beyond ±10mm risk rubbing or suspension interference. Always verify lug nut thread pitch (12x1.25) and seat type (cone or ball). Aftermarket wheels often use conical seats; using incorrect seats can cause lug nuts to loosen. Safety first: improper fitment compromises handling and can lead to wheel detachment.
Historical Fitment Data Reference
In our dataset, Nissan TITAN XD Crew Cab appears from 2016 to 2024 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50 miles of driving, then periodically check.
- ✅ Aftermarket wheels with a center bore larger than 77.8mm require hub-centric rings; never rely solely on lug nuts for centering.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not reduce thread engagement below 8 full turns.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Nissan TITAN XD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2018 Nissan TITAN XD Crew Cab?
The 2018 Nissan TITAN XD Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan TITAN XD Crew Cab have the same bolt pattern as the 2018?
The Nissan TITAN XD Crew Cab uses the 6x139.7 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What lug nut size does the 2018 Nissan TITAN XD Crew Cab use?
The 2018 Nissan TITAN XD Crew Cab uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2018 Nissan TITAN XD Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25mm, and a center bore of at least 77.8mm (using hub rings if larger).
Will wheels from another Nissan fit my 2018 TITAN XD Crew Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
What does 25mm offset mean for the 2018 TITAN XD Crew Cab?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset