1995 Oldsmobile 88 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Oldsmobile 88, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 47 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 88 — Year-Specific Fitment Context
The 1995 Oldsmobile 88 is in year 4 of 8 using the 5x115 pattern (1992–1999). Wheels from any 1992–1999 Oldsmobile 88 are cross-compatible with the 1995 model.
Oldsmobile 88 Bolt Pattern by Year
The table below shows how the 88's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 1995 Oldsmobile 88
For your 1995 Oldsmobile 88, the bolt pattern is 5x115 with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they have a center bore of at least 70.3mm or use hub-centric rings to prevent vibrations. The factory offset is 47mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to ensure proper clamping force. Never use ball-seat lug nuts on this vehicle. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Oldsmobile 88 appears from 1992 to 1999 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with a center bore smaller than 70.3mm; use hub-centric rings if larger.
- ✅ Check for caliper clearance when using wheels with offset below 42mm or above 52mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Oldsmobile 88 — Frequently Asked Questions
What is the bolt pattern for a 1995 Oldsmobile 88?
The 1995 Oldsmobile 88 uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 47mm.
What other years of Oldsmobile 88 have the same bolt pattern as the 1995?
The Oldsmobile 88 uses the 5x115 pattern from 1992 through 1999. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1995 Oldsmobile 88?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Oldsmobile fit my 1995 88?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Can I put aftermarket wheels on my 1995 Oldsmobile 88?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 47mm, and a center bore of at least 70.3mm (using hub rings if larger).
Can I use spacers on my 1995 Oldsmobile 88?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset