2002 Oldsmobile Bravada Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Oldsmobile Bravada, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x127 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 78.3 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Bravada — Year-Specific Fitment Context
The 2002 Oldsmobile Bravada is in year 2 of 4 using the 6x127 pattern (2001–2004). Wheels from any 2001–2004 Oldsmobile Bravada are cross-compatible with the 2002 model. Across its full production run (1992–2004), the Bravada has also used: 5x120.65.
Oldsmobile Bravada Bolt Pattern by Year
The table below shows how the Bravada's wheel specifications have changed over the years. The 2002 model year is highlighted.
6x127 Pattern Context
This bolt pattern appears on 49 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x127:
Expert Buying Guide for 2002 Oldsmobile Bravada
For your 2002 Oldsmobile Bravada, the 6x127 bolt pattern and 78.3mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone seat). Ball-seat or incorrect pitch nuts can loosen, leading to wheel detachment. Verify that aftermarket wheels are hub-centric or use compatible rings. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Oldsmobile Bravada appears from 1992 to 2004 (12 model years). Across model years, this model appears with 2 bolt patterns (5x120.65, 6x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 38.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 60mm to prevent rubbing or suspension interference.
- ✅ Ensure aftermarket wheels have a center bore ≥78.3mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Oldsmobile Bravada — Frequently Asked Questions
What is the bolt pattern for a 2002 Oldsmobile Bravada?
The 2002 Oldsmobile Bravada uses a 6x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.3mm and the offset is 50mm.
What other years of Oldsmobile Bravada have the same bolt pattern as the 2002?
The Oldsmobile Bravada uses the 6x127 pattern from 2001 through 2004. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the PCD for a 2002 Oldsmobile Bravada?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Bravada, the PCD is 6x127.
How do I measure the bolt pattern on my 2002 Oldsmobile?
The 2002 Bravada uses a 6x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2002 Oldsmobile Bravada use?
The 2002 Oldsmobile Bravada uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2002 Oldsmobile Bravadas use lug bolts or lug nuts?
The 2002 Bravada requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset