2000 Oldsmobile Bravada Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Oldsmobile Bravada, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2000 Bravada — Year-Specific Fitment Context
The 2000 model year is the final year of the Oldsmobile Bravada's 5x120.65 bolt pattern run (since 1992). Wheels from any 1992–2000 Oldsmobile Bravada are cross-compatible with the 2000 model. Important: starting in 2001, Oldsmobile switched to 6x127 — those wheels will not fit the 2000 model. Across its full production run (1992–2004), the Bravada has also used: 6x127.
Oldsmobile Bravada Bolt Pattern by Year
The table below shows how the Bravada's wheel specifications have changed over the years. The 2000 model year is highlighted.
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2000 Oldsmobile Bravada
For the 2000 Oldsmobile Bravada, the bolt pattern is 5x120.65mm with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they have a center bore of at least 70.3mm or use hub-centric rings to prevent vibration and stress on lug studs. The factory offset is 12mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Avoid ball-seat lug nuts as they can loosen. Re-torque lug nuts after 50-100 miles of driving. Note: 2001+ Bravada wheels (6x127) will not fit.
Historical Fitment Data Reference
In our dataset, Oldsmobile Bravada appears from 1992 to 2004 (12 model years). Across model years, this model appears with 2 bolt patterns (5x120.65, 6x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 38.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles.
- ✅ Use hub-centric rings if aftermarket wheel bore >70.3mm.
- ✅ Verify offset stays within 7-17mm to avoid rubbing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Oldsmobile Bravada — Frequently Asked Questions
What is the bolt pattern for a 2000 Oldsmobile Bravada?
The 2000 Oldsmobile Bravada uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 12mm.
What other years of Oldsmobile Bravada have the same bolt pattern as the 2000?
The Oldsmobile Bravada uses the 5x120.65 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Will 2001 Oldsmobile Bravada wheels fit a 2000 model?
No. The 2001 Oldsmobile Bravada switched to a 6x127 bolt pattern, which is not compatible with the 2000 model's 5x120.65. Using mismatched patterns is unsafe.
Can I use spacers on my 2000 Oldsmobile Bravada?
Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Oldsmobile fit my 2000 Bravada?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
How do I measure the bolt pattern on my 2000 Oldsmobile?
The 2000 Bravada uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset