1993 Plymouth Laser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Plymouth Laser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Laser — Year-Specific Fitment Context
The 1993 Plymouth Laser is in year 2 of 3 using the 5x114.3 pattern (1992–1994). Wheels from any 1992–1994 Plymouth Laser are cross-compatible with the 1993 model.
Plymouth Laser Bolt Pattern by Year
The table below shows how the Laser's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Plymouth Laser
For your 1993 Plymouth Laser, the 5x114.3 bolt pattern is shared with 1992–1994 models, ensuring cross-compatibility. The 67.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and stress on lug nuts. Offset must stay within 35–45mm; deviations risk rubbing or poor handling. Always use M12x1.5 lug nuts with the correct seat type (cone or ball) matching your wheels—mismatched seats cause loosening. Re-torque after 50–100 miles. Avoid wheels with offset below 35mm (inner clearance issues) or above 45mm (outer clearance).
Historical Fitment Data Reference
In our dataset, Plymouth Laser appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 67.1mm exactly.
- ✅ Check inner clearance for brake calipers and suspension components; 17x7.5" wheels with 40mm offset are a common safe fit.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Plymouth Laser — Frequently Asked Questions
What is the bolt pattern for a 1993 Plymouth Laser?
The 1993 Plymouth Laser uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Plymouth Laser have the same bolt pattern as the 1993?
The Plymouth Laser uses the 5x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Do 1993 Plymouth Lasers use lug bolts or lug nuts?
The 1993 Laser requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 1993 Plymouth Laser?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 1993 Plymouth Laser?
The OEM offset for the 1993 Laser is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1993 Plymouth Laser?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Laser, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset