1992 Plymouth Laser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Plymouth Laser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Laser — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Plymouth Laser's 5x114.3 bolt pattern era, which continued through 1994 (3 consecutive years). Wheels from any 1992–1994 Plymouth Laser are cross-compatible with the 1992 model.
Plymouth Laser Bolt Pattern by Year
The table below shows how the Laser's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Plymouth Laser
For your 1992 Plymouth Laser, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm ID to wheel hub OD) are mandatory to prevent vibration and ensure proper load transfer. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use lug nuts with M12x1.5 thread pitch and the correct seat type—factory wheels use conical (60-degree) seats. Never mix seat types; improper seating can cause wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Plymouth Laser appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is at least 67.1mm; use hub-centric rings if larger.
- ✅ Avoid wheels with offset below 35mm (rubbing on fenders) or above 45mm (brake clearance issues).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Plymouth Laser — Frequently Asked Questions
What is the bolt pattern for a 1992 Plymouth Laser?
The 1992 Plymouth Laser uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Plymouth Laser have the same bolt pattern as the 1992?
The Plymouth Laser uses the 5x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the PCD for a 1992 Plymouth Laser?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 Laser, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 1992 Plymouth Laser?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-45mmmm offset mean for the 1992 Laser?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Plymouth.
What lug nut size does the 1992 Plymouth Laser use?
The 1992 Plymouth Laser uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset