2003 Pontiac Grand Am Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Pontiac Grand Am, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x115
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 70.3 mm
Offset (ET) 42
Torque Specs 80 ft-lbs (108 Nm)

2003 Grand Am — Year-Specific Fitment Context

The 2003 Pontiac Grand Am is in year 4 of 6 using the 5x115 pattern (2000–2005). Wheels from any 2000–2005 Pontiac Grand Am are cross-compatible with the 2003 model. Across its full production run (1992–2005), the Grand Am has also used: 5x100.

Pontiac Grand Am Bolt Pattern by Year

The table below shows how the Grand Am's wheel specifications have changed over the years. The 2003 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x100 57.1 45
1993 5x100 57.1 42
1994 5x100 57.1 42
1995 5x100 57.1 42
1996 5x100 57.1 42
1997 5x100 57.1 42
1998 5x100 57.1 42
1999 5x100 57.1 42
2000 5x115 70.3 42
2001 5x115 70.3 42
2002 5x115 70.3 42
▸ 2003 5x115 70.3 42
2004 5x115 70.3 42
2005 5x115 70.3 42

Fitment Notes

The 2003 Pontiac Grand Am has a bolt pattern of 5x115.

This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Pontiac Grand Am appears from 1992 to 2005 (14 model years).

Across model years, this model appears with 2 bolt patterns (5x100, 5x115).

5x115 Pattern Context

This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x115:

2003 Pontiac Grand Am — Frequently Asked Questions

What is the bolt pattern for a 2003 Pontiac Grand Am?

The 2003 Pontiac Grand Am uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.

What other years of Pontiac Grand Am have the same bolt pattern as the 2003?

The Pontiac Grand Am uses the 5x115 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.

What is the factory wheel offset for a 2003 Pontiac Grand Am?

The OEM offset for the 2003 Grand Am is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the center bore of a 2003 Pontiac Grand Am?

The factory center bore (hub bore) for the 2003 Pontiac Grand Am is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Do 2003 Pontiac Grand Ams use lug bolts or lug nuts?

The 2003 Grand Am requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What lug nut size does the 2003 Pontiac Grand Am use?

The 2003 Pontiac Grand Am uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Pontiac Grand Am has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2003 Pontiac Grand Am, please report it via our About page contact so we can verify and update this record.

Pontiac Grand Am By Year

1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005

Other Pontiac Models

Aztek Bonneville Firebird G3 G5 G6 G6 (2009.5) G8 GTO Grand Am Grand Prix LeMans Montana Montana SV6 Solstice Sunbird Sunfire Torrent Trans Sport Vibe