2001 Pontiac Montana Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Pontiac Montana, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Montana — Year-Specific Fitment Context
The 2001 Pontiac Montana is in year 3 of 7 using the 5x115 pattern (1999–2005). Wheels from any 1999–2005 Pontiac Montana are cross-compatible with the 2001 model.
Pontiac Montana Bolt Pattern by Year
The table below shows how the Montana's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Pontiac Montana has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Pontiac Montana appears from 1999 to 2005 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2001 Pontiac Montana — Frequently Asked Questions
What is the bolt pattern for a 2001 Pontiac Montana?
The 2001 Pontiac Montana uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 45mm.
What other years of Pontiac Montana have the same bolt pattern as the 2001?
The Pontiac Montana uses the 5x115 pattern from 1999 through 2005. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Do 2001 Pontiac Montanas use lug bolts or lug nuts?
The 2001 Montana requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 70.3mm center bore important for the 2001 Montana?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2001 Pontiac Montana?
The factory center bore (hub bore) for the 2001 Pontiac Montana is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2001 Pontiac Montana?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 45mm, and a center bore of at least 70.3mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Pontiac Montana is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1999-2005 (7 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Pontiac Montana, please report it via our About page contact so we can verify and update this record.