2020 Porsche 911 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Porsche 911, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 911 — Year-Specific Fitment Context
The 2020 Porsche 911 is in year 29 of 33 using the 5x130 pattern (1992–2024). Wheels from any 1992–2024 Porsche 911 are cross-compatible with the 2020 model.
Porsche 911 Bolt Pattern by Year
The table below shows how the 911's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1993 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1994 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1995 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1996 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1997 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1998 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1999 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2000 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2001 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2002 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2003 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2004 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2005 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2006 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2007 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2008 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2009 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2010 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2011 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2012 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2013 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2014 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2015 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2016 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2017 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2018 | 5x130 | 71.6 | 50 |
| 2019 | 5x130 | 71.6 | 50 |
| ▸ 2020 | 5x130 | 71.6 | 50 |
| 2021 | 5x130 | 71.6 | 50 |
| 2022 | 5x130 | 71.6 | 50 |
| 2024 | 5x130 | 71.6 | 50 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2020 Porsche 911
For your 2020 Porsche 911, the 5x130 bolt pattern is shared with all 911 models from 1992–2024, ensuring broad cross-compatibility. However, the 71.6mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive; the factory spec is around 50mm, but variations of ±5mm may affect handling and clearance. Always verify offset to avoid rubbing or suspension contact. Safety warning: use only lug nuts with the correct 14x1.5 thread pitch and proper seat type (cone or ball) matching the wheel. Incorrect lug nuts can loosen or damage the wheel. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Porsche 911 appears from 1992 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 96 lb-ft (130 Nm) after 50–100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 71.6mm center bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug nuts are compatible and hub-centric.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Porsche 911 — Frequently Asked Questions
What is the bolt pattern for a 2020 Porsche 911?
The 2020 Porsche 911 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50mm.
What other years of Porsche 911 have the same bolt pattern as the 2020?
The Porsche 911 uses the 5x130 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Porsche?
The 2020 911 uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2020 Porsche 911?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2020 Porsche 911?
The OEM offset for the 2020 911 is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 71.6mm center bore important for the 2020 911?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset