2007 Porsche 911 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Porsche 911, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 (certain models have only one large center bolt!) |
| Center Bore (CB) | 71.6 (certain models have 84.0!) mm |
| Offset (ET) | 23 (without ABS), 57 (with ABS) |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 911 — Year-Specific Fitment Context
The 2007 Porsche 911 is in year 16 of 33 using the 5x130 pattern (1992–2024). Wheels from any 1992–2024 Porsche 911 are cross-compatible with the 2007 model.
Porsche 911 Bolt Pattern by Year
The table below shows how the 911's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1993 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1994 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1995 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1996 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1997 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1998 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1999 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2000 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2001 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2002 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2003 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2004 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2005 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2006 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| ▸ 2007 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2008 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2009 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2010 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2011 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2012 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2013 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2014 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2015 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2016 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2017 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2018 | 5x130 | 71.6 | 50 |
| 2019 | 5x130 | 71.6 | 50 |
| 2020 | 5x130 | 71.6 | 50 |
| 2021 | 5x130 | 71.6 | 50 |
| 2022 | 5x130 | 71.6 | 50 |
| 2024 | 5x130 | 71.6 | 50 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2007 Porsche 911
For the 2007 Porsche 911, the bolt pattern is 5x130 with a center bore of 71.6mm (some models use 84.0mm). When selecting aftermarket wheels, hub-centric rings are essential to match the exact center bore, preventing vibrations and ensuring proper load distribution. Offset is critical: models without ABS require 23mm offset, while those with ABS need 57mm. Using the wrong offset can cause rubbing or clearance issues. Always verify lug nut specifications: standard thread is 14x1.50 with a ball seat; some models use a single center bolt. Never mix lug nut types, as improper seating can lead to wheel detachment. For safety, consult a professional fitment specialist.
Historical Fitment Data Reference
In our dataset, Porsche 911 appears from 1992 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify center bore diameter before mounting; use hub-centric rings if aftermarket wheels have a larger bore.
- ✅ Check offset carefully: 23mm for non-ABS, 57mm for ABS models; incorrect offset may cause brake caliper or suspension interference.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Porsche 911 — Frequently Asked Questions
What is the bolt pattern for a 2007 Porsche 911?
The 2007 Porsche 911 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6 (certain models have 84.0!)mm and the offset is 23 (without ABS), 57 (with ABS)mm.
What other years of Porsche 911 have the same bolt pattern as the 2007?
The Porsche 911 uses the 5x130 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2007 Porsche?
The 2007 911 uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2007 Porsche 911?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 911, the PCD is 5x130.
What is the center bore of a 2007 Porsche 911?
The factory center bore (hub bore) for the 2007 Porsche 911 is 71.6 (certain models have 84.0!)mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2007 Porsche 911?
Yes, but ensure the wheel spacers match the 5x130 bolt pattern and 71.6 (certain models have 84.0!)mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 (certain models have only one large center bolt!) hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset