1996 Porsche 911 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Porsche 911, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 (certain models have only one large center bolt!) |
| Center Bore (CB) | 71.6 (certain models have 84.0!) mm |
| Offset (ET) | 23 (without ABS), 57 (with ABS) |
| Torque Specs | 100 ft-lbs (135 Nm) |
1996 911 — Year-Specific Fitment Context
The 1996 Porsche 911 is in year 5 of 33 using the 5x130 pattern (1992–2024). Wheels from any 1992–2024 Porsche 911 are cross-compatible with the 1996 model.
Porsche 911 Bolt Pattern by Year
The table below shows how the 911's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1993 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1994 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1995 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| ▸ 1996 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1997 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1998 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1999 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2000 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2001 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2002 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2003 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2004 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2005 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2006 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2007 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2008 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2009 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2010 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2011 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2012 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2013 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2014 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2015 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2016 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2017 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2018 | 5x130 | 71.6 | 50 |
| 2019 | 5x130 | 71.6 | 50 |
| 2020 | 5x130 | 71.6 | 50 |
| 2021 | 5x130 | 71.6 | 50 |
| 2022 | 5x130 | 71.6 | 50 |
| 2024 | 5x130 | 71.6 | 50 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 1996 Porsche 911
For the 1996 Porsche 911, ensure wheels match the 5x130 bolt pattern and correct center bore: 71.6mm (some models use 84.0mm). Aftermarket wheels with larger bores require hub-centric rings to prevent vibration. Offset is critical: 23mm for non-ABS, 57mm for ABS models; incorrect offset stresses bearings and suspension. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone or ball) to avoid loosening. Verify compatibility with 1992–2024 911 wheels, but double-check offset and bore for your specific ABS configuration.
Historical Fitment Data Reference
In our dataset, Porsche 911 appears from 1992 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 71.6mm or 84.0mm bore; otherwise, vibrations may occur.
- ✅ For ABS-equipped models, offset must be 57mm; using 23mm offset wheels can trigger ABS faults and handling issues.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Porsche 911 — Frequently Asked Questions
What is the bolt pattern for a 1996 Porsche 911?
The 1996 Porsche 911 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6 (certain models have 84.0!)mm and the offset is 23 (without ABS), 57 (with ABS)mm.
What other years of Porsche 911 have the same bolt pattern as the 1996?
The Porsche 911 uses the 5x130 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What is the factory wheel offset for a 1996 Porsche 911?
The OEM offset for the 1996 911 is typically around 23 (without ABS), 57 (with ABS)mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1996 Porsche 911?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 911, the PCD is 5x130.
Can I use spacers on my 1996 Porsche 911?
Yes, but ensure the wheel spacers match the 5x130 bolt pattern and 71.6 (certain models have 84.0!)mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 (certain models have only one large center bolt!) hardware.
What does 23 (without ABS), 57 (with ABS)mm offset mean for the 1996 911?
An offset of 23 (without ABS), 57 (with ABS)mm means the wheel's mounting surface is 23 (without ABS), 57 (with ABS)mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Porsche.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset