2000 Porsche 911 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Porsche 911, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 (certain models have only one large center bolt!) |
| Center Bore (CB) | 71.6 (certain models have 84.0!) mm |
| Offset (ET) | 23 (without ABS), 57 (with ABS) |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 911 — Year-Specific Fitment Context
The 2000 Porsche 911 is in year 9 of 33 using the 5x130 pattern (1992–2024). Wheels from any 1992–2024 Porsche 911 are cross-compatible with the 2000 model.
Porsche 911 Bolt Pattern by Year
The table below shows how the 911's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1993 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1994 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1995 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1996 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1997 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1998 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 1999 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| ▸ 2000 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2001 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2002 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2003 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2004 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2005 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2006 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2007 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2008 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2009 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2010 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2011 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2012 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2013 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2014 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2015 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2016 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2017 | 5x130 | 71.6 (certain models have 84.0!) | 23 (without ABS), 57 (with ABS) |
| 2018 | 5x130 | 71.6 | 50 |
| 2019 | 5x130 | 71.6 | 50 |
| 2020 | 5x130 | 71.6 | 50 |
| 2021 | 5x130 | 71.6 | 50 |
| 2022 | 5x130 | 71.6 | 50 |
| 2024 | 5x130 | 71.6 | 50 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2000 Porsche 911
For the 2000 Porsche 911, the bolt pattern is 5x130 with a center bore of 71.6mm (some models use 84.0mm). Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibrations and ensure proper load transfer. Offset is critical: 23mm for non-ABS models, 57mm for ABS-equipped cars. Using the wrong offset can cause rubbing or clearance issues. Lug nuts are 14x1.50 thread pitch; verify seat type (cone or ball) to match the wheel. Never mix lug nut types, and always torque to spec. For models with a single center bolt, use only that fastener. Proper fitment ensures safety and performance.
Historical Fitment Data Reference
In our dataset, Porsche 911 appears from 1992 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 71.6mm bore (or 84.0mm if applicable) to avoid vibrations.
- ✅ Double-check offset: 23mm for non-ABS, 57mm for ABS; incorrect offset can lead to brake caliper or suspension contact.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Porsche 911 — Frequently Asked Questions
What is the bolt pattern for a 2000 Porsche 911?
The 2000 Porsche 911 uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6 (certain models have 84.0!)mm and the offset is 23 (without ABS), 57 (with ABS)mm.
What other years of Porsche 911 have the same bolt pattern as the 2000?
The Porsche 911 uses the 5x130 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Will wheels from another Porsche fit my 2000 911?
Only if they share the exact same 5x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6 (certain models have 84.0!)mm.
Do 2000 Porsche 911s use lug bolts or lug nuts?
The 2000 911 requires N 14x1.50 (certain models have only one large center bolt!) hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 71.6 (certain models have 84.0!)mm center bore important for the 2000 911?
The 71.6 (certain models have 84.0!)mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2000 Porsche 911 use?
The 2000 Porsche 911 uses N 14x1.50 (certain models have only one large center bolt!) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset