2011 Porsche Panamera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Porsche Panamera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 62 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Panamera — Year-Specific Fitment Context
The 2011 Porsche Panamera is in year 2 of 15 using the 5x130 pattern (2010–2024). Wheels from any 2010–2024 Porsche Panamera are cross-compatible with the 2011 model.
Porsche Panamera Bolt Pattern by Year
The table below shows how the Panamera's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2010 | 5x130 | 71.6 | 62 |
| ▸ 2011 | 5x130 | 71.6 | 62 |
| 2012 | 5x130 | 71.6 | 62 |
| 2013 | 5x130 | 71.6 | 62 |
| 2014 | 5x130 | 71.6 | 62 |
| 2015 | 5x130 | 71.6 | 62 |
| 2016 | 5x130 | 71.6 | 62 |
| 2017 | 5x130 | 71.6 | 62 |
| 2018 | 5x130 | 71.6 | 62 |
| 2019 | 5x130 | 71.6 | 62 |
| 2020 | 5x130 | 71.6 | 62 |
| 2021 | 5x130 | 71.6 | 62 |
| 2022 | 5x130 | 71.6 | 50 |
| 2024 | 5x130 | 71.6 | 50 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2011 Porsche Panamera
For your 2011 Porsche Panamera, the 5x130 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration. The factory offset is 62mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Porsche uses ball seats, not conical. Improper lug nuts can lead to wheel loosening. Verify load rating and ensure TPMS compatibility. Professional installation and torque to spec (130 Nm) are recommended.
Historical Fitment Data Reference
In our dataset, Porsche Panamera appears from 2010 to 2024 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 12.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when changing offset; the 2011 Panamera has large brakes that may interfere with lower offset wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Porsche Panamera — Frequently Asked Questions
What is the bolt pattern for a 2011 Porsche Panamera?
The 2011 Porsche Panamera uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 62mm.
What other years of Porsche Panamera have the same bolt pattern as the 2011?
The Porsche Panamera uses the 5x130 pattern from 2010 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 Porsche Panamera?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 71.6mm center bore important for the 2011 Panamera?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 62mm offset mean for the 2011 Panamera?
An offset of 62mm means the wheel's mounting surface is 62mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Porsche.
What is the factory wheel offset for a 2011 Porsche Panamera?
The OEM offset for the 2011 Panamera is typically around 62mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset