2012 Porsche Panamera Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2012 Porsche Panamera is 5x130. It has a center bore of 71.6 mm, an offset range of 62, and utilizes B 14x1.50 (Ball seat, 17mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2012 Porsche Panamera Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Center Bore (Hub Bore) | 71.6 mm |
| Offset Range (ET) | 62 |
| Thread Size (Lug Nut / Bolt) | B 14x1.50 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2012 Panamera — Year-Specific Fitment Context
The 2012 Porsche Panamera is in year 3 of 16 using the 5x130 pattern (2010–2025). Wheels from any 2010–2025 Porsche Panamera are cross-compatible with the 2012 model.
Porsche Panamera Bolt Pattern by Year
The table below shows how the Panamera's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2010 | 5x130 | 71.6 | 62 |
| 2011 | 5x130 | 71.6 | 62 |
| ▸ 2012 | 5x130 | 71.6 | 62 |
| 2013 | 5x130 | 71.6 | 62 |
| 2014 | 5x130 | 71.6 | 62 |
| 2015 | 5x130 | 71.6 | 62 |
| 2016 | 5x130 | 71.6 | 62 |
| 2017 | 5x130 | 71.6 | 62 |
| 2018 | 5x130 | 71.6 | 62 |
| 2019 | 5x130 | 71.6 | 62 |
| 2020 | 5x130 | 71.6 | 62 |
| 2021 | 5x130 | 71.6 | 62 |
| 2022 | 5x130 | 71.6 | 50 |
| 2024 | 5x130 | 71.6 | 50 |
| 2025 | 5x130 | 71.6 | 50 |
2012 Porsche Panamera Wheel Interchange & Donor Fitment Guide (5x130)
The 5x130 bolt pattern is shared by 226 vehicles in our database (moderately common). For safe wheel swaps on the 2012 Porsche Panamera, donor rims must match the 5x130 PCD and have a center bore of at least 71.6 mm:
DIRECT HUB MATCH Same 5x130 Pattern & Exact 71.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Porsche Cayenne Coupe | 71.6 mm (Exact) | 50 | 14x1.5 (Ball) |
| 2006 Porsche Cayman | 71.6 mm (Exact) | 55 | B 14x1.50 (Ball) |
| 2020 Porsche Taycan | 71.6 mm (Exact) | 50 | 14x1.5 (Ball) |
| 2021 Porsche Taycan Cross Turismo | 71.6 mm (Exact) | 50 | 14x1.5 (Ball) |
| 2024 Porsche Taycan Sport Turismo | 71.6 mm (Exact) | 50 | 14x1.5 (Ball) |
| 2004 Volkswagen Touareg | 71.6 mm (Exact) | 50 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x130 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Ram ProMaster 1500 | 78.1 mm | 78.1mm → 71.6mm |
50-55 |
| 2024 Ram ProMaster 2500 | 78.1 mm | 78.1mm → 71.6mm |
50-55 |
| 2024 Ram ProMaster 3500 | 78.1 mm | 78.1mm → 71.6mm |
50-55 |
| 2015 Ram ProMaster Cargo Van | 78.1 mm | 78.1mm → 71.6mm |
60 |
| 2015 Ram ProMaster Window Van | 78.1 mm | 78.1mm → 71.6mm |
60 |
| 2002 Mercedes-Benz G-Class | 84.1 mm | 84.1mm → 71.6mm |
63 |
Expert Buying Guide for 2012 Porsche Panamera
For the 2012 Porsche Panamera, the 5x130 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 62mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Porsche uses ball seats, not conical. Mismatched seats can lead to loose wheels and accidents. Verify lug nut length to avoid bottoming out or insufficient thread engagement.
Historical Fitment Data Reference
In our dataset, Porsche Panamera appears from 2010 to 2025 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 12.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and hub damage may occur.
- ✅ Check inner clearance for aftermarket wheels; the 2012 Panamera has tight tolerances near the strut and brake caliper.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
2012 Porsche Panamera — Frequently Asked Questions
What is the bolt pattern for a 2012 Porsche Panamera?
The 2012 Porsche Panamera uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 62mm.
What other years of Porsche Panamera have the same bolt pattern as the 2012?
The Porsche Panamera uses the 5x130 pattern from 2010 through 2025. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2012 Porsche Panamera?
Absolutely. Just ensure the aftermarket wheels have a 5x130 bolt pattern, an offset near 62mm, and a center bore of at least 71.6mm (using hub rings if larger).
Can I use spacers on my 2012 Porsche Panamera?
Yes, but ensure the wheel spacers match the 5x130 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
What is the factory wheel offset for a 2012 Porsche Panamera?
The OEM offset for the 2012 Panamera is typically around 62mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2012 Porsche?
The 2012 Panamera uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →