2007 Saab 9-5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Saab 9-5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 9-5 — Year-Specific Fitment Context
The 2007 Saab 9-5 is in year 9 of 13 using the 5x110 pattern (1999–2011). Wheels from any 1999–2011 Saab 9-5 are cross-compatible with the 2007 model.
Saab 9-5 Bolt Pattern by Year
The table below shows how the 9-5's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2007 Saab 9-5
For the 2007 Saab 9-5, the critical specs are 5x110 bolt pattern, 65.1mm center bore, and 49mm offset. When selecting aftermarket wheels, always use hub-centric rings to match the 65.1mm bore; otherwise, vibrations and unsafe lug nut loading may occur. The offset is sensitive: deviations beyond ±5mm can cause rubbing or clearance issues. Use only lug nuts with 12x1.50 thread pitch and the correct seat type (cone or ball seat) as specified by the wheel manufacturer. Never mix seat types. Re-torque lug nuts after 50-100 miles. Wheels from 1999-2011 Saab 9-5 models are direct fit.
Historical Fitment Data Reference
In our dataset, Saab 9-5 appears from 1999 to 2011 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles of driving.
- ✅ Verify that aftermarket wheels include hub-centric rings for the 65.1mm bore; otherwise, vibrations may occur.
- ✅ Check offset carefully: 49mm is standard; offsets below 44mm may rub the fender, above 54mm may contact the strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Saab 9-5 — Frequently Asked Questions
What is the bolt pattern for a 2007 Saab 9-5?
The 2007 Saab 9-5 uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 49mm.
What other years of Saab 9-5 have the same bolt pattern as the 2007?
The Saab 9-5 uses the 5x110 pattern from 1999 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the PCD for a 2007 Saab 9-5?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 9-5, the PCD is 5x110.
Can I use spacers on my 2007 Saab 9-5?
Yes, but ensure the wheel spacers match the 5x110 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
What is the center bore of a 2007 Saab 9-5?
The factory center bore (hub bore) for the 2007 Saab 9-5 is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2007 Saab 9-5?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 49mm, and a center bore of at least 65.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset