2008 Saab 9-5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Saab 9-5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 9-5 — Year-Specific Fitment Context
The 2008 Saab 9-5 is in year 10 of 13 using the 5x110 pattern (1999–2011). Wheels from any 1999–2011 Saab 9-5 are cross-compatible with the 2008 model.
Saab 9-5 Bolt Pattern by Year
The table below shows how the 9-5's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2008 Saab 9-5
For your 2008 Saab 9-5, the bolt pattern is 5x110 with a 65.1mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The factory offset is 49mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—Saab uses a conical (60-degree) seat. Ball-seat or incorrect pitch nuts can lead to wheel loosening. Re-torque after 50-100 miles. Wheels from 1999-2011 Saab 9-5 models are direct fit.
Historical Fitment Data Reference
In our dataset, Saab 9-5 appears from 1999 to 2011 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 Nm after 50-100 miles of driving.
- ✅ Verify hub-centric ring inner diameter matches 65.1mm; outer diameter must match aftermarket wheel bore.
- ✅ Avoid using wheels with offset below 44mm (too aggressive) or above 54mm (too tucked) to prevent suspension or brake contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Saab 9-5 — Frequently Asked Questions
What is the bolt pattern for a 2008 Saab 9-5?
The 2008 Saab 9-5 uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 49mm.
What other years of Saab 9-5 have the same bolt pattern as the 2008?
The Saab 9-5 uses the 5x110 pattern from 1999 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Saab 9-5?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 49mm, and a center bore of at least 65.1mm (using hub rings if larger).
Do 2008 Saab 9-5s use lug bolts or lug nuts?
The 2008 9-5 requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Saab fit my 2008 9-5?
Only if they share the exact same 5x110 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
How do I measure the bolt pattern on my 2008 Saab?
The 2008 9-5 uses a 5x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset