2009 Saab 9-5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Saab 9-5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 9-5 — Year-Specific Fitment Context
The 2009 Saab 9-5 is in year 11 of 13 using the 5x110 pattern (1999–2011). Wheels from any 1999–2011 Saab 9-5 are cross-compatible with the 2009 model.
Saab 9-5 Bolt Pattern by Year
The table below shows how the 9-5's wheel specifications have changed over the years. The 2009 model year is highlighted.
Fitment Notes
The 2009 Saab 9-5 has a bolt pattern of 5x110.
This means it is a 5 lug pattern with a circle diameter of 110mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Saab 9-5 appears from 1999 to 2011 (13 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
2009 Saab 9-5 — Frequently Asked Questions
What is the bolt pattern for a 2009 Saab 9-5?
The 2009 Saab 9-5 uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 49mm.
What other years of Saab 9-5 have the same bolt pattern as the 2009?
The Saab 9-5 uses the 5x110 pattern from 1999 through 2011. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Can I use spacers on my 2009 Saab 9-5?
Yes, but ensure the wheel spacers match the 5x110 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
What is the PCD for a 2009 Saab 9-5?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 9-5, the PCD is 5x110.
Can I put aftermarket wheels on my 2009 Saab 9-5?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 49mm, and a center bore of at least 65.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2009 Saab 9-5?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Saab 9-5 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1999-2011 (13 model years).
- Observed bolt-pattern variants: 1 (5x110).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2009 Saab 9-5, please report it via our About page contact so we can verify and update this record.